Sunday, August 14, 2011

PERSONALIZED POST-IT-NOTE COVER

I have bought these as gifts over the years, and I thought to myself, I know I can make this, but of course, it was just taking the time to figure out the dimensions and create myself a template.





Post-It-Note Holder Directions:
What you will need:
Paper (double sided works best)
Scoring board
Post It Note Pad
Double sided tape or glue
Velcro
Cute sticker or embelishment for the front cover
* Cut a strip of paper 3" wide x 8" long (double sided is cute because you will see the inside when you open it.
 
Scoring:
First fold is at 2 5/8"
Second fold add another 3/8", which makes it at 3"
Third fold is an additional 3-1/8", which makes it at 6-1/8"
Fourth fold is another 3/8", which makes it at 61/2"
You should have 1-7/8" remaining
 
Attach your Post-It-Note pad with either tape or glue. I took off about 10 sheets, because you will see that it is a little too thick otherwise.
Add velcro to the top and bottom with glue, and let dry throughly; see my photo.
Add your embelishment as your finishing touch.

1 comment:

  1. I did this one! Mine is a little different though. I used brads and a ribbon to connect them instead of doing velcro (because I didn't have any). But it was pretty quick and easy to make.

    ReplyDelete